| HEAT-PRO™
INDUSTRIAL OVENS
The
HEAT-PRO™
product line offers a full range of quality process ovens including Bench, Cabinet, Truck/Walk-in, Top-Loaded, & Conveyorized
configurations as well as a complete line of 55-gallon drum & IBC heating equipment. Available from 350°F - 800°F in natural gas, electric, steam & thermal fluid heat. Computer generated 3-Dimensional modeling and parametric engineering technologies allow LEWCO to offer standard units in a wide range of size combinations that meet the specific needs of the end user. Class-A solvent processing and custom ovens also available.
|
| Drum
& IBC Heating Equipment |
|
|
The
HEAT-PRO™ product line is also
recognized as the industry leader in 55-gallon drum and intermediate bulk
container (IBC) heating equipment. Standard models accommodate from (1) to (32)
drums or up to (4) 350 gallon IBC tanks.
With the introduction of the 55-Gallon Drum Heating
Tunnels we continue to lead the industry in drum and IBC heating technology.
|
|
|
Designed for processing material on carts or racks,
HEAT-PRO™
Walk-In Ovens are available with a flat
plate steel floor or an insulated
floor with track guides for trouble free loading. Available from 350°F -
800°F in natural gas, electric, steam & thermal fluid heat. Standard units are available in a
wide range of size combinations
that meet the specific needs of the application.
|
| Knocked-Down
Construction
|
 |
Knocked-Down Construction facilitates the cost effective installation of an oven too large to ship as a complete assembly. Standard design and construction techniques have been developed to minimize field installation time. Each oven is shipped with a fully assembled heater/burner box, all controls, and a complete set of installation instructions and drawings. Available in most any size, these models are rated for service to
500°F.
|
|
HEAT-PRO™
Conveyor Ovens are available with Vertical Down, Horizontal, or Dual
airflow patterns. Standard units can be equipped with a variety of
conveyor options including: wire mesh, steel slat, & gravity
roller. Available
from 350°F - 800°F in natural gas, electric, steam & thermal
fluid heat. Standard units are available in a wide range of size
combinations that meet the specific needs of the application.
|
 |
HEAT-PRO™ Cabinet Ovens feature horizontal air flow for processing small or flat parts on shelves or trays. Standard models are available from 8-64 cubic feet and are offered in either top or bottom mounted heat chambers. |
|
HEAT-PRO™ Industrial Bench
Ovens, engineered for years of
dependable trouble-free service, provide an economical and portable solution to your
process heating needs. Optional equipment and accessories can be included to suit specific
applications.
|
HEAT-PRO™
Industrial Ovens feature U.L. approved controls.
HEAT-PRO™
Industrial Ovens meet the requirements of the National Fire Protection
Association (NFPA) Standard 86, Factory Mutual, & The Occupational
Safety & Health Administration (OSHA).
 
|
|
|
|
CONFIGURABLE
MODELS
|
|
|
 LEWCO
Inc. employs cutting edge technologies to design and manufacture some of the
highest quality and most cost effective Industrial Ovens available today.
Parametric engineering, 3-Dimensional modeling, and JIT manufacturing allow
LEWCO to offer custom size ovens for the price of a standard model. These
technologies also allow LEWCO to offer aggressive delivery schedules while still
maintaining superb quality.
|
|
|
|
|
|
New
Distributor Application
|
|
|
|
|
|
|
 |
|
MANUFACTURED
BY LEWCO, INC
|
|
|
|
LEWCO, Inc.,
was established in 1917 as a welding and fabricating job shop. Through the years, we have
evolved into a manufacturer of conveyors and industrial ovens, servicing both domestic and
international markets.
Headquartered in north central Ohio, LEWCO,
Inc. is conveniently located within a 500 mile radius of over 50% of the United
States’ manufacturing base.
Our new 135,000 sq. ft. facility houses a
complete professional staff of sales, engineering and skilled trades personnel, as well as
some of the most modern metal manufacturing equipment available today. We utilize
state-of-the-art engineering and manufacturing processes including computer aided design
(CAD) with shop floor interface. CNC Turret punching, CNC "Fine Plasma" burning,
CNC sawing and Robotic welding are also employed in the manufacture of our quality
products.
Our Employee Involvement Program is a
company-wide initiative reinforcing our commitment to high-quality products and service.
It provides a well defined continuous quality improvement process that guarantees our
customers the best possible products and service.
|
|
|
|
|
|
|
